Amigurumi TONTI and YUMI Free Pattern

TONTI and YUMI 

BODY RECIPE 

Hello friends. First of all thank you for buying and buying my design. Explanatory for you and I put a lot of effort into making a clear recipe. For your use when knitting .I tried to enrich with pictures. As a girl or boy in the recipe .There is a baby recipe you can make. Each step you have difficulty. You can contact me from the addresses I have specified. As the toys you are ducking.

MATERIALS: 

* Ropes: 100 gr./250 m. Himalaya Delusc Bamboo Skin Color 124-04 (about 1.5 ropes going) 

(In this delicacy Snowball Organicdec is also prefer Gazzal Baby Cotton threads You can.) 

* Crochet: 2 mm. * Eyes: 15 mm. * 30 mm joint apparatus for legs 25 mm joint apparatus for arms 

* 10 cm to keep the neck upright. pipe in length also electrical wire 

* Sewing needle and fixing needle 

* 8 cm long needle for shaping face 

* Black domino thread for embroideries 

* Bead fiber 

Abbreviations: 

Magic ring: magic ring 

sc: single crochet 

inc: increase 

w: knit 3 single crochet into the same bowknot 

dec: decrease 

*: repeat 

HDC: half double crochet 

DC: double crochet 

sl-st: slip stitch 

ch: chain 

BLO: knitting from the back lobe of the loop 

FLO: knitting from the front lobe of the loop 

NOTE: Unless otherwise stated, it is spiral continue by knitting. While knitting order loop setting so as not to confuse. 

You can use. Loop at the end of each row writes the number. 

!!! Due to the difference in hand tightness, some places such as knee cap protrusion in the recipe there may be slippage. If there is a slippage according to the baby you knit .I recommend you to adjust. Knee protrusion, cheek protrusion, joint spaces .It was written separately in the knitted rows. Visuals about adjusting for yourself will help you. You can make adjustments using pictures.

HEAD 

1. Magic ring 6sc 

2.6inc = 12sc 

3. (sc, inc) * 6 = 18sc 

4. (2sc, inc) * 6 = 24sc 

5. (3sc, inc) * 6 = 30sc 

6. (4sc, inc) * 6 = 36sc 

7. (5sc, inc) * 6 = 42sc 

8. (6sc, inc) * 6 = 48sc 

9. (7sc, inc) * 6 = 54sc 

10 (8sc, İnc) * 6 = 60sc 

11 (9SC, İnc) * 6 = 66sc 

12 (10SC, İnc) * 6 = 72sc 

13 (11sc, İnc) * 6 = 78sc 

14 (12sc, İnc) * 6 = 84sc 

15-24 (10 rows) = 84sc 

25 (12sc, dec) * 6 = 78sc 

26-30 (5 rows) = 78sc 

31.28sc, skip 2h pull off (for eye), 13sc, skip 2h pull off (for eye), 33sc = 78sc 

32. = 78sc 

33. 18sc, (sc, inc) * 5 (cheek overhang), 17sc, (sc, inc) * 5 (cheek overhang), 23sc = 88sc 

34-38 (5 rows) = 88sc 

39.22sc, (sc, dec) * 4, 18sc, (sc, dec) * 4, 24sc = 80sc 

40. 19sc, 6dec, 18sc, 6dec, 19sc = 68sc 

We attach our eyes to the eye sockets. 41. 10sc, (sc, dec) * 5, 17sc, (sc, dec) * 5, 11sc = 58sc 

42. 10sc, 6dec, 15sc, 6dec, 9sc = 46sc 

43. (4sc, dec) * 3, 3sc, 6inc, 3sc, (dec, 4sc) * 2, dec, 2sc = 46sc 

We begin to fill the head tightly with fiber. 

44. = 46sc 

45. (4sc, dec) * 2, 20sc, (4sc, dec) * 2, 2sc = 42sc 

46. (5sc, dec) * 2, 8dec, (dec, 4sc) * 2 = 30sc 

47. 6sc, 4dec, 6sc, 4dec, 2sc = 22sc 

48. = 22sc Cut the rope. Fill the head tightly. * Fill and shape the cheek ridges especially tightly. Note: 34-35. We process the nose on the desks as in the picture. 

* After filling the head with fiber, enter from both sides of the eyes with a long needle, eye socket 

We’re doing. You can use the youtube video in the link I will write for this; 

* when we want to make a man’s nose 33-34 as in the picture. On desks We process 7 loops wide When we want to make a girl 

33-34 as in the picture. On desks .We are processing 5 loops wide. 

* We process the lashes, eyebrows and mouth as in the picture. With needle or marker before machining. It will be easier if you set and process the borders with a pencil. EAR (2 pieces) 

1.4 ch checks 

2. (from 2nd ch) w, sc, w, sc (we attach the marker here) = 8sc 

3. 3inc, sc, 3inc, sc = 14sc 

4. (sc, inc) * 3, sc, (sc, inc) * 3, sc = 20sc 

5. = 20sc 

6. Knit another 5sc and cut the thread. 

1-6 

* 26-33 to 10 stitches from the edge of the eye. We sew our ears on the rows. 

You can determine the location with a marker pen, either with a needle or as I did. You can obtain an oval image by sewing the ends of the ears with a loop inward. RIGHT HAND 

Knit the fingers according to the order in which I write. Thumb = Magic ring 7sc, finish 3 rows 7sc. 

Index Finger = Magic ring 6sc, finish 4 rows 6sc. Middle Finger = Magic ring 6sc, finish 5 rows 6sc. Ring Finger = Magic ring 6sc, finish 4 rows 6sc. Little Finger = Magic ring 6sc, 3 rows of 6sc, we continue without cutting the rope. Note: You can knit and combine the fingers separately or do what I do 

You can knit with chain method like. 

We move on to join the fingers: 

1. (Little finger) 2sc, (ring finger) 3sc, (middle finger) 3sc, (index finger) 6sc, (middle finger) 3sc, (ring finger) 3sc, (pinky finger) 4sc = 24sc we attach the marker here.

2. = 24sc 

3. (3sc, inc) * 6 = 30sc 

4. = 30sc 

(We combine the thumb in the 5th and 6th rows.) 

5. Hand 11sc, (finger and hand together) 3sc, hand 16sc = 30sc 

6. 11sc from hand, 4sc from finger, 16sc from hand = 31sc 

7.29sc, dec = 30sc 

8.15dec = 15sc 

Fill the hand with fiber. 

9. 15inc = 30sc 

10. = 30sc 

11. (13sc, dec) * 2 = 28sc 

12-20 (9 rows) = 28sc 

Finger 

Thumb  

21. (sc, dec) * 9, sc = 19sc 

22. (sc, inc) * 9, sc = 28sc 

23. (13sc, inc) * 2 = 30sc 

24-29 (6 rows) = 30sc 

30. 11sc, 2zn pull 2 ch skip (joint slot), 17sc = 30sc 

31. = 30sc 

32. (3sc, dec) * 6 = 24sc 

We attach the joint to its socket. 33. (2sc, dec) * 6 = 18sc 

34. (sc, dec) * 6 = 12sc 

35.6dec = 6sc. 

LEFT HAND 

Knit the fingers according to the order in which I write. Thumb = Magic ring 7sc, finish 3 rows 7sc. 

Index Finger = Magic ring 6sc, finish 4 rows 6sc. Middle 

Finger = Magic ring 6sc, finish 5 rows 6sc. Ring Finger = Magic ring 6sc, finish 4 rows 6sc. 

Little Finger = Magic ring 6sc, 3 rows of 6sc, we continue without cutting the rope. 

Note: You can knit and combine the fingers separately or do what I do 

You can knit with chain method like. We move on to join the fingers: 

1. (Little finger) 2sc, (ring finger) 3sc, (middle finger) 3sc, (index finger) 6sc, (middle finger) 3sc, (ring finger) 3sc, (pinky finger) 4sc = 24sc 

we attach the marker here. 2. = 24sc 

3. (3sc, inc) * 6 = 30sc 

4. = 30sc 

(We combine the thumb in the 5th and 6th rows.) 

5. Hand 14sc, (finger and hand together) 3sc, 13sc = 30sc 

6. 14sc from hand, 4sc from finger, 13sc from hand = 31sc 

7.29sc, dec = 30sc 

8.15dec = 15sc 

Fill the hand with fiber. 

9. 15inc = 30sc 

10. = 30sc 

11. (13sc, dec) * 2 = 28sc 

12-20 (9 rows) = 28sc 

21. (sc, dec) * 9, sc = 19sc 

22. (sc, inc) * 9, sc = 28sc 

23. (13sc, inc) * 2 = 30sc 

24-29 (6 rows) = 30sc 

30.27sc, 2 ch skip 2 ch skip (joint slot), sc = 30sc 

31. = 30sc 

32. (3sc, dec) * 6 = 24sc 

We attach the joint to its socket. 

33. (2sc, dec) * 6 = 18sc 

34 (sc, dec) * 6 = 12sc 

35.6dec = 6sc. 

RIGHT FOOT 

Knit the fingers according to the order in which I write. Thumb = Magic ring 8sc, finish 3 rows 8sc. 

Pointing Finger = Magic ring 7sc, finish 3 rows 7sc. Middle Finger = Magic ring 7sc, finish 3 rows 7sc. Ring Finger = Magic ring 6sc, finish 3 rows 6sc. Little Finger = Magic ring 6sc, finish 2 rows 6sc. 

1-11 

We move on to join the fingers: 

1. (Little Finger) 2sc, (ring finger) 3sc, (middle finger) 4sc, (index 

finger) 4sc, (thumb) 8sc, (index finger) 3sc, (middle finger) 3sc, (ring 

finger) 3sc, (pinky finger) 4sc = 34sc 

2. = 34sc 

3. = 34sc 

4. (15sc, dec) * 2 = 32sc 

5-11 (7 rows) = 32sc 

12. 19sc, 10 ch check 12 ch skip (for heel protrusion), sc = 30sc 

13. 19sc, from 10sc ch, sc = 30sc 

14. (3sc, dec) * 6 = 24sc 

15. (2sc, dec) * 6 = 18sc 

16. (sc, dec) * 6 = 12sc 

17. 6dec = 6sc pick the thread with a needle. We have made the heel part right now. 

Top 

Finger 

Now we will start making the leg part. * We hold the foot with the fingers facing us, we attach the rope from the right side. 

1. 12sc from the front, 10sc from the back = 22sc 

2. (10sc, inc) * 2 = 24sc 

3. (3sc, inc) * 6 = 30sc 

4-13 (10 rows) = 30sc 

14. 8sc, 5inc (knee protrusion), 9sc, 4dec = 31sc 

15. = 31sc 

16. = 31sc 

17. 8sc, 6dec, 7sc, 4inc = 29sc 

18. 25sc, inc, 3sc = 30sc 

19. = 30sc 

20. (4sc, inc) * 6 = 36sc 

21. 2sc, inc, (5sc, inc) * 5, 3sc = 42sc 

22-29 (8 rows) = 42sc 

30.44sc, 2ch skip 2ch skip (joint slot), 36sc = 42sc 

31. = 42sc 

32. (5sc, dec) * 6 = 36sc 

33. (4sc, dec) * 6 = 30sc 

We attach the joint 

34. (3sc, dec) * 6 = 24sc 

35. (2sc, dec) * 6 = 18sc 

36. (sc, dec) * 6 = 12sc 

37.6dec = 6sc. * Decreases behind the knee cap as in the picture should be exactly right. 

* The enhancements in front of the knee cap are as forward as in the picture. denkgel should. If 1-2 loops slip you may not care, but if there is a noticeable shift is due to hand difference. You can fix it for yourself.  

LEFT FOOT 

Knit the fingers according to the order in which I write. Thumb = Magic ring 8sc, finish 3 rows 8sc. 

Pointing Finger = Magic ring 7sc, finish 3 rows 7sc. Middle Finger = Magic ring 7sc, finish 3 rows 7sc. Ring Finger = Magic ring 6sc, finish 3 rows 6sc. Little Finger = Magic ring 6sc, finish 2 rows 6sc. We move on to join the fingers: 

1. (Little Finger) 2sc, (ring finger) 3sc, (middle finger) 3sc, (index finger) 

3sc, (thumb) 8sc, (index finger) 4sc, (middle finger) 4sc, (ring finger) 

3sc, (little finger) 4sc = 34sc 

2. = 34sc 

3. = 34sc 

4. (15sc, dec) * 2 = 32sc 

5-11 (7 rows) = 32sc 

12. 3sc, 10 ch check skip 12 ch (for heel protrusion), 17sc = 30sc 

13. 3sc, from 10sc ch, 17sc = 30sc 

14. (3sc, dec) * 6 = 24sc 

15. (2sc, dec) * 6 = 18sc 

16. (sc, dec) * 6 = 12sc 

17. 6dec = 6sc pick the thread with a needle. We have made the heel part right now. Now we will start making the leg part. The toes will look at us 

We attach the rope from the right side. 

1. 12sc from the front, 10sc from the back = 22sc 

2. (10sc, inc) * 2 = 24sc 

3. (3sc, inc) * 6 = 30sc 

4-13 (10 rows) = 30sc 

14. 8sc, 5inc (knee protrusion), 9sc, 4dec = 31sc 

15. = 31sc 

16. = 31sc 

17. 8sc, 6dec, 7sc, 4inc = 29sc 

18. 25sc, inc, 3sc = 30sc 

19. = 30sc 

20. (4sc, inc) * 6 = 36sc 

21. 2sc, inc, (5sc, inc) * 5, 3sc = 42sc 

22-29 (8 rows) = 42sc 

30.26sc, 2ch skip 2ch skip (joint slot), 14sc = 42sc 

31. = 42sc 

32. (5sc, dec) * 6 = 36sc 

33. (4sc, dec) * 6 = 30sc 

We attach the joint 

34. (3sc, dec) * 6 = 24sc 

35. (2sc, dec) * 6 = 18sc 

36. (sc, dec) * 6 = 12sc 

37.6dec = 6sc. 

BODY 

1. Magic ring 6sc 

2.6inc = 12sc 

3. (sc, inc) * 6 = 18sc 

4. sc, inc, (2sc, inc) * 5, sc = 24sc 

5. (3sc, inc) * 6 = 30sc 

6.2sc, inc, (4sc, inc) * 5, 2sc = 36sc 

7. (5sc, inc) * 6 = 42sc 

8. 3sc, inc, (6sc, inc) * 5.3sc = 48sc 

9. (7sc, inc) * 6 = 54sc 

10.4sc, Inc., (8sc, Inc.) * 5,4sc = 60sc 

11. (9sc, inc) * 6 = 66sc 

12. 5sc, inc, 8sc, 2zn pull 2 ch skip (joint slot), inc, (10sc, inc) * 2, 6sc, 2 ch check 2 ch 

skip (joint slot), 2sc, inc, 10sc, inc, 5sc = 72sc 

13. (11sc, inc) * 6 = 78sc 

14-21 (8 rows) = 78sc 

* You can attach the legs you knit into the joint socket (our starting point on the back of the body). Then fill it tightly with the fiber. 22.36sc, 2dec, 38sc = 76sc 

Right foot left foot  

* The body is finished 22-23. Belly hole where we do 2dec-2inc between rows we will do.

23. (2sc, dec) * 3, 25sc, 2inc, 25sc, (dec, 2sc) * 3 = 72sc 

24. (4sc, dec) * 2, 48sc, (dec, 4sc) * 2 = 68sc 

25. = 68sc 

26.16sc, dec, 32sc, dec, 16sc = 66sc 

27. (9sc, dec) * 6 = 60sc 

28. 14sc, (2sc, dec) * 8, 14sc = 52sc 

29-32 (4 rows) = 52sc 

33. 13sc, (5sc, dec) * 4, 11sc = 48sc 

34-40 (7 rows) = 48sc 

41. 14sc, 2 ch check 2 ch skip (joint slot), 22sc, 2 ch check 2 ch skip (joint slot), 8sc = 48sc 

42. = 48sc 

43. = 48sc 

44. (6sc, dec) * 6 = 42sc 

45. = 42sc 

* You can attach the arms you knit to the joint slots. Then with fiber fill tightly. 46. (5sc, dec) * 6 = 36sc 

47. (4sc, dec) * 6 = 30sc 

48. (3sc, dec) * 6 = 24sc 

49. (10sc, dec) * 2 = 22sc 

50. = sew long and cut the thread to sew 22 sc. 

After completely filling and finishing the body to keep the legs close to the trunk 

We apply the process. I showed in the pictures we proceed by following the stages. * A close attachment from the back of the right leg we stick the needle from the ground. Opposite 

We are subtracting by. 

** We stick the needle in one or two loops from the distance. We take it out from the front. 

* Again, we stick two loops from a distance and remove them from the opposite side. 

* We insert the needle from two stitches apart and remove it from the back of the left leg. 

* We take the needle off the rope. We pull the two ropes firmly on the right and left of the leg. Two 

We pull the thread through a hole in the back of the body, as in the picture. Hanging tight again we connect and fix. We hide the ropes. 

* We make the belly button with rope. 

* You can use a pipe like the picture to keep your head upright. Finally freaking out we sew to the body. Your baby is complete. If you wish, I have prepared a different .You can enrich with clothing and accessories recipes in concepts. 

FROG CONCEPT 

CLOTHING (hat-shirt-cloth) RECIPE 

Abbreviations: 

Magic ring: magic ring 

sc: single crochet 

inc: increment 

w: knit 3 single crochet into the same bowknot 

dec: decrement 

*: repeat 

HDC: single (ramming) handrail 

DC: double handrail 

sl-st: slip stitch 

ch: chain 

BLO: knitting from the back lobe of the loop 

FLO: knitting from the front lobe of the loop 

NOTE: Unless otherwise stated, it is spiral continue by knitting. While knitting order loop setting so as not to confuse .You can use. Loop at the end of each row writes the number. 

MATERIALS: 

* Ropes: 50 gr./125 m. Kartopu Organica 494 (Light Green) 

Catania 0205 (Green) 

Snowball Organica Black 

Snowball Organica White 

* If you wish instead of green in Catania Snowball 

You can also use Organica 442 green. * Crochet: 2 mm. * Sewing needle and fixing needle 

Note: When knitting, ignore the color of thread used in the pictures. in Title 

Knit according to the rope colors written. The pictures are representative pictures for illustrative purposes.

HAT (green Catania 0205) 

1. Magic ring 6sc 

2.6inc = 12sc 

3. (sc, inc) * 6 = 18sc 

4. sc, inc, (2sc, inc) * 5, sc = 24sc 

5. (3sc, inc) * 6 = 30sc 

6.2sc, inc, (4sc, inc) * 5, 2sc = 36sc 

7. (5sc, inc) * 6 = 42sc 

8. 3sc, inc, (6sc, inc) * 5.3sc = 48sc 

9. (7sc, inc) * 6 = 54sc 

10.4sc, inc, (8sc, inc) * 5.4sc = 60sc 

11. (9sc, inc) * 6 = 66sc 

12.5sc, inc, (10sc, inc) * 5,5sc = 72sc 

13. (11sc, inc) * 6 = 78sc 

14.6sc, inc, (12sc, inc) * 5,6sc = 84sc 

15. (13sc, inc) * 6 = 90sc 

16-27 (12 rows) = Continue without breaking the 90sc thread. 

Now we move on to making the side bands of the hat. 

1. Back to 7sc (we put the marker here.) 

2. Skip the first hole, turn 6sc. 

3. Skip the first hole 5sc. 

Skip the first hole 

5-26 (22 rows) = 4sc (we knit by rotating each row) 

27. Skip the first hole turn 3sc 

28. Skip the first hole turn 2sc 

29. Skip the first hole, cut the sc thread. 

We make the 2nd tape. From the place where we put the marker, rope to the 29th hole 

We are installing. 

1. Back to 7sc 

2. Skip the first hole, turn 6sc. 

3. Skip the first hole 5sc. 

Skip the first hole 

5-26 (22 rows) = 4sc (we knit by rotating each row) 

27. Skip the first hole turn 3sc 

28. Skip the first hole turn 2sc 

29. Skip the first hole sc (we continue without breaking the rope of the hat and tapes 

we surround it with single crochet.) 

Note: When our hat is finished, the front separation of the hat will be shorter than the rear separation. 

we will place the eyes and nose. Optionally sl-st the front of the hat 

You can do. 

EYES 

Eyelid (green Catania 0205) 

1. Magic ring 6sc 

2.6inc = 12sc 

3. (sc, inc) * 6 = 18sc 

4. (2sc, inc) * 6 = 24sc 

5. (3sc, inc) * 6 = 30sc 

6. (4sc, inc) * 6 = 36sc 

7-12 (6 rows) = 36sc 

Note: 11-15 on both sides of the hat. on the rows as the picture on the eyelids 

We plant. 

Eyeball (with white) 

1. Magic ring 6sc 

2.6inc = 12sc 

3. (sc, inc) * 6 = 18sc 

4. (2sc, inc) * 6 = 24sc 

5. (3sc, inc) * 6 = 30sc 

6-11 (6 rows) = 30sc 

12. (3sc, dec) * 6 = 24sc 

13. (2sc, dec) * 6 = 18sc 

14. (sc, dec) * 6 = 12sc 

15. 6dec = 6sc 

Eye Doll (with black) 

1. Magic ring 5sc 

2.5inc = 10sc 

3. (sc, inc) * 5 = 15sc 

4. (2sc, inc) * 5 = 20sc 

Note: We treat the pupil with a white thread as in the picture and We are sewing it on the circle. * We place the eyeball into the eyelid. Parts together not steep. So you can roll the eyeball into the eyelid as we want we can turn it to look in different directions  

T-SHIRT (with white) 

(*): HDC, 1 ch check, HDC into the same hole 

“(*)” Explanation in red where you can see this sign 

We apply. We are increasing this process. Note: Increments in the previous row by pulling the chain into the holes we created we will do it by sinking. 

1. 44 ch checks 

2. Starting from 3rd ch 5 HDC, (*), 10 HDC, (*), 6 HDC, (*), 10 HDC, (*), 7 HDC = 46 turn 

3.check 2 ch, 7 HDC, (*), 11 HDC, (*), 7 HDC, (*), 11 HDC, (*), 6 HDC = 50 turns 

4.2 checks, 6 HDC, (*), 12 HDC, (*), 8 HDC, (*), 12 HDC, (*), 8 HDC = 54 turns 

5. 2 ch checks, 8 HDC, (*), 13 HDC, (*), 9 HDC, (*), 13 HDC, (*), 7 HDC = 58 turns 

6. 2 ch checks, 7 HDC, (*), 14 HDC, (*), 10 HDC, (*), 14 HDC, (*), 9 HDC = 62 turns 

7. 2 ch checks, 9 HDC, (*), 15 HDC, (*), 11 HDC, (*), 15 HDC, (*), 8 HDC = 66 turns 

8. 1 ch check, 9sc, 14 ch check 18 HDC skip, 14sc, 14 ch check 18 HDC skip, 11sc = 60 

frost 

9. 2 ch checks, 11 HDC, (over 14 ch) 14 HDC, 14 HDC, (over 14 ch) 

14 HDC, 9 HDC = 62 turns 

10-13 (4 rows) 62 HDC = 62 turns 

During the 14th row we make single crochet = 62sc now go behind the shirt and 

we make button hole as in the picture. 

BEZ (Light Green) 

Note: We will knit the cloth in two pieces and stitch it together. Front Track 

1. 36 ch checks 

2. Return 34 HDC from 3rd ch. 

3-5 (3 rows) Return to 34 HDC 

6. (Skip first hole), 9 sl-st, return to 14 HDC 

Pull 1 ch, (skip first hole) 12 HDC 

8. Draw 1 ch, (skip first hole) 10 HDC turn 

9. Shoot 1 ch, (skip first hole) 8 HDC turn 

10-14 (5 rows) 2 ch pull 8 HDC finish cut the thread. 

Rear Track 68 ch checks 

2. Return to 66 HDC starting from Ch 

3. 2 ch checks 2 HDC, (2 ch checks 2 HDC skip), 57 HDC, (2 ch checks 2 HDC skip), 3HDC turn 

4.2 checks, 66 HDC turns 

5.Check 2 ch, turn to 66 HDC 

6. (skip first hole) 15 sl-st, turn 36 HDC (we do not knit the remaining loops) 

7. (skip first hole) 1 sl-st, return to 32 HDC 

8. (skip first hole) 1 sl-st, turn 28 HDC 

9. (skip first hole) 2 sl-st, 22 HDC turn 

10. (skip first hole) 2 sl-st, return to 14 HDC 

11. (skip first hole) 2 sl-st, 8 HDC turn 

12-14 (3 rows) shoot 2 chs, finish 8 HDC. Leave the thread long to sew. 

* We sew 2 pieces we knit together like the picture. 

* We enclose the cloth we are wearing with the single crochet method as in the picture. I recommend that you sink double single crochet into the corner parts to prevent it from puckering. 

* We sew the buttons on the front part of the cloth to the places shown in the picture. 

UNICORN CONCEPT 

CLOTHING (hat-jumpsuit) RECIPE 

Hello friends. First of all thank you for buying and buying my design. Explanatory for you and I put a lot of effort into making a clear recipe. For your use when knitting I tried to enrich with pictures. In the recipe, under the name of the unicorn concept .There is a unicorn hat and ruffled jumpsuit recipe. Each step you have difficulty .You can contact me from the addresses I have specified. As the toys you are ducking .If you tag on Instagram, we will see what is knitted together.

Abbreviations: 

Magic ring: magic ring 

sc: single crochet 

inc: increment 

w: knit 3 single crochet into the same bowknot 

dec: decrement 

*: repeat 

HDC: single (ramming) handrail 

DC: double handrail 

sl-st: slip stitch 

ch: chain 

BLO: knitting from the back lobe of the loop 

FLO: knitting from the front lobe of the loop 

NOTE: Unless otherwise stated, it is spiral continue by knitting. While knitting order loop setting so as not to confuse .You can use. Loop at the end of each row writes the number. 

MATERIALS: 

* Ropes: 50 gr./125 m. Snowball Organica; 

Dark Pink-257 

Pink-782 

Turquoise-576 

Orange-1311 

MOR-1721 

Yellow-1335 

Catania 

Green-241 

Lanosa Simsim 

Silver 

* Crochet: 2 mm. * 3 white bonibon buttons 

* 2 dark pink shirt buttons 

* 1 snap 

* Line sewing thread 

* Sewing needle and fixing needle 

Note: When knitting, ignore the color of thread used in the pictures. in Title 

Knit according to the rope colors written. The pictures are representative pictures for illustrative purposes.

HAT (light pink) 

1. Magic ring 6sc 

2.6inc = 12sc 

3. (sc, inc) * 6 = 18sc 

4. sc, inc, (2sc, inc) * 5, sc = 24sc 

5. (3sc, inc) * 6 = 30sc 

6.2sc, inc, (4sc, inc) * 5, 2sc = 36sc 

7. (5sc, inc) * 6 = 42sc 

8. 3sc, inc, (6sc, inc) * 5.3sc = 48sc 

9. (7sc, inc) * 6 = 54sc 

10.4sc, inc, (8sc, inc) * 5.4sc = 60sc 

11. (9sc, inc) * 6 = 66sc 

12.5sc, inc, (10sc, inc) * 5,5sc = 72sc 

13. (11sc, inc) * 6 = 78sc 

14.6sc, inc, (12sc, inc) * 5,6sc = 84sc 

15. (13sc, inc) * 6 = 90sc 

16-27 (12 rows) = Continue without breaking the 90sc thread. 

Now we move on to making the side bands of the hat. 

1. Back to 7sc (we put the marker here.) 

2. Skip the first hole, turn 6sc. 

3. Skip the first hole 5sc. 

Skip the first hole 

5-26 (22 rows) = 4sc (we knit by rotating each row) 

27. Skip the first hole turn 3sc 

28. Skip the first hole turn 2sc 

29. Skip the first hole, cut the sc thread. 

We make the 2nd tape. From the place where we put the marker, rope to the 29th hole 

We are installing. 

1. Back to 7sc 

2. Skip the first hole, turn 6sc. 

3. Skip the first hole 5sc. 

Skip the first hole 

5-26 (22 rows) = 4sc (we knit by rotating each row) 

27. Skip the first hole turn 3sc 

28. Skip the first hole turn 2sc 

29. Skip the first hole sc (we continue without breaking the rope of the hat and tapes we surround it with single crochet.) 

Note: When our hat is finished, the front separation of the hat will be shorter than the rear separation. we will place the eyes and nose. Optionally sl-st the front of the hat You can do. 

HORN 

1. Magic ring 6sc 

2. = 6sc 

3. (2sc, inc) * 2 = 8sc 

4. (sc, inc) * 4 = 12sc 

5-8 (4 rows) = 12sc 

9. (5sc, inc) * 2 = 14sc 

10. = 14sc 

11. (6sc, inc) * 2 = 16sc 

12. = 16sc 

13. (7sc, inc) * 2 = 18sc 

14. (8sc, inc) * 2 = 20sc 

15. = Sew and finish the thread long to sew 20sc. * 6-14 from the front, with the horn centered on the hat. on desks 

We plant. 

HAT DECORATION 

bangs 

1. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (turquoise) 

2. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (yellow) 

3. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (orange) 

4. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (dark pink) 

5. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (purple) 

6. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (green) 

7. 14 ch checks 2. Sl-st from 2 Ch, 2sc, 2 HDC, 8 DC (turquoise) 

mane 

1. Return to 50 ch check 2. 49sc from the ch (orange) 

2. Return to 50 ch check 49sc from 2.ch (orange) 

3. Check back at 50 ch 49sc (dark pink) starting at 2.ch 

4. Check back at 50 ch 49sc from 2nd ch (dark pink) 

5. Return to 50 ch check 49sc from the 2nd ch (purple) 

6. Check back at 50 ch 49sc from the 2nd ch (purple) 

7. Return to the 50 ch check 49sc from the 2nd ch (green) 

8. Back to 50 ch check 49sc from 2nd ch (green) 

9. Return to 50 ch check 49sc from 2nd ch (turquoise) 

10.50 ch check back 49sc from 2nd ch (turquoise) 

FIRFIR LI TULUM RECIPE (pink color) 

(*): HDC, 1 ch check, HDC into the same hole 

“(*)” Explanation in red where you can see this sign 

We apply. We are increasing this process. 

Note: Increments in the previous row by pulling the chain into the holes we created we will do it by sinking. 

1. 44 ch checks 

2. Starting from 3rd ch 5 HDC, (*), 10 HDC, (*), 6 HDC, (*), 10 HDC, (*), 7 HDC = 46 turn 

3.check 2 ch, 7 HDC, (*), 11 HDC, (*), 7 HDC, (*), 11 HDC, (*), 6 HDC = 50 turns 

4.2 checks, 6 HDC, (*), 12 HDC, (*), 8 HDC, (*), 12 HDC, (*), 8 HDC = 54 turns 

5. 2 ch checks, 8 HDC, (*), 13 HDC, (*), 9 HDC, (*), 13 HDC, (*), 7 HDC = 58 turns 

6. 2 ch checks, 7 HDC, (*), 14 HDC, (*), 10 HDC, (*), 14 HDC, (*), 9 HDC = 62 turns 

7. 2 ch checks, 9 HDC, (*), 15 HDC, (*), 11 HDC, (*), 15 HDC, (*), 8 HDC = 66 turns 

8. 1 ch check, 9sc, 14 ch check 18 HDC skip, 14sc, 14 ch check 18 HDC skip, 11sc = 60 

9. 2 ch checks, 11 HDC, (over 14 ch) 14 HDC, 14 HDC, (over 14 ch) 

14 HDC, 9 HDC = 62 turns 

10-17 (8 rows) 2 ch checks, 62 HDC = 62 turns 

* 17. When we knit and finish the row, we connect the two ends as in the picture. A chain 

we pull and cut our rope. * Now we will knit where there will be leg separation. On the front part of the piece we duck .we find the middle point and mark it. 

* We count 13 loops from the left and right of the mark and mark again. Middle we take out the marker. Markers on the sides until the overalls are completely finished we will not subtract. * We will do over 25 stitches in total at the front. Of the place we marked we start knitting from the knot next to it. 

You can understand it better by examining the pictures. 

18.check 2 ch, turn to 24 HDC 

19.Check 1 ch, (skip first hole) 1 sl-st, 20 HDC turn 

20. Shoot 1 ch, (skip first hole) 1 sl-st, turn 16 HDC 

21. Take 1 ch, (skip first hole) 1 sl-st, 12 HDC turn 

22. draw 1 ch, (skip first hole) 1 sl-st, 8 HDC turn 

23-26 (4 rows) 2 ch shots, 7 HDC turns finish. 

* Now we will knit the piece on the back. Next to the stitch we marked 

We start from the loop. 

Front Side 

11th 

18.Check 2 chs, return to 35 HDC 

19.Check 1 ch, (skip first loop) 1 sl-st, return to 31 HDC 

20. Take 1 ch, (skip first loop) 1 sl-st, 27 HDC turn 

21. Take 1 ch, (skip first loop) 1 sl-st, 23 HDC turn 

22. draw 1 ch, (skip first loop) 1 sl-st, return to 19 HDC 

23.Check 1 ch, (skip first loop) 1 sl-st, return to 15 HDC 

24. 1 ch draw, (skip first loop) 1 sl-st, 11 HDC turn 

25. Pull 1 ch, (skip first loop) 1 sl-st, 8 HDC turn 

Take 26-30 (5 rows) 2 ch, turn 7 HDC and tie the dark pink string. 

* Now around the lower part of our overalls with a dark pink string like the picture 

We surround the knitting single crochet. 

* We will make a ruffle like the picture on the upper part of the legs. We attach our markers from the front to the 19th row and from the rear to the 20th row. 

* Now we will knit a ruffle between this marked place. 1. Double HDC for each loop between the places we have marked, e.g. Frost. 2. Double HDC for each loop between the places we have marked, e.g. Frost. 3. We knit single crochet in each loop between the places we have marked and finish. 

* We apply the same procedure to the other leg. 

* We will now ruffle the arms. On the top of the arm as shown we wear the crochet hook. We will knit a ruffle on 18 HDC that we jumped in 8th on the overalls. During the 1st row we knit double HDC on each loop. During the 2nd row we knit double HDC on each loop. Along the 3rd row, we knit single crochet in each loop and finish. 

* We apply the same process to the other arm. 

* Now we will knit buttonhole for the back, button snap on the net and back 

We will sew buttons on the part. We will do this by following the pictures. * Chain on the back where we want to knit flat places with single crochet and make buttonholes We’re shooting. 

RAINBOW APPLIQUE 

1.8 ch checks 

2. starting from 2nd ch 7inc = 14sc (each we will change the color in the order) 

3-7 (5 rows) = 14sc 

Clouds (2) 

1.7 ch 

2. from the 2nd ch inc, sc, 2 

3-hand railing, sc, last remaining chain w, sc, 2 of 3 finish handrail, sc, sl-st. 

We sew the cloud to two sides as in the picture. Then on my overalls we place and sew. 

Similar Posts