|

Dog Jack Russell Amigurumi Free Pattern

Amigurumi free patterns shares are waiting for you on our website every day. We shared an excellent amigurumi dog pattern in this content.

MAX

Materials

Worsted weight yarn

 White (Red Heart Super Saver: White)

 Light brown (Red Heart Super Saver: Buff)

 Black (Red Heart Super Saver: Black)

 Blue (Red Heart Super Saver: Blue)

 Yellow (Red Heart Super Saver: Bright Yellow)

2 safety eyes (9 mm, brown)

White felt

Pipe cleaners

Stuffing of choice

F (3.75 mm) hook

Glue (Fabri-Tac)

Pins

Scissors

Yarn needle

Abbreviations

mc = magic circle

ch = chain

sc = single crochet

st = stitch

inc = 2 sc in the next stitch

dec = join the next 2 stitches into 1

fo = finish off

( ) = number of stitches you should have at the end of the round/row

[ ] = repeat whatever is between the brackets the number of times stated

Important notes

This pattern is worked in continuous rounds. Do not join.

Gauge is not important for this amigurumi. Use the same yarn weight, size hook and tension throughout the pattern.

Stuff and shape the pieces as you go.

When the pattern says to leave a long yarn tail, make sure it’s long enough (I usually leave about 20 inches [50 cm]). It’s better to be safe than sorry!

It’s a good idea to insert a stitch marker either in the first or the last stitch of each round to help keep your place. Move the marker as you work around.

How to insert the eyes. There are 2 options:

Option 1: Insert the eyes on the head before closing the head.

Option 2: Glue in the eyes at the end, when Max is fully assembled.

Finished size

Approximately 6½ inches (16½ cm) tall. Depending on the tension, hook, yarn

and how much stuffing you use, your amigurumi may be slightly smaller or larger than mine.

PATTERN

Pattern

White part behind the eye (make 2)

Cut 2 circles out of white felt, approximately ½ inch (1½ cm) in

diameter. Make a small hole in the middle to insert the safety eye.

Patch on the head

With brown yarn

Do not stuff.

This part is worked in rows. At the end of every row, ch 1 and turn.

Row 1: ch 11, sc in the 2nd ch from the hook and sc to the end of the chain (10)

Rows 2-6: sc 10 (10)

Row 7: dec, sc 6, dec (8)

Row 8: dec, sc 4, dec (6)

Row 9: dec, sc 2, dec (4)

Fo and leave a long yarn tail for assembly.

Body

With white yarn

Stuff as you go.

Round 1: mc with 6 st (6)

Round 2: [inc] x 6 (12)

Round 3: [sc 1, inc] x 6 (18)

Round 4: [sc 2, inc] x 6 (24)

Round 5: [sc 3, inc] x 6 (30)

Rounds 6-18: sc 30 (30)

Round 19: [sc 3, dec] x 6 (24)

Round 20: [sc 2, dec] x 6 (18)

Round 21: [sc 1, dec] x 6 (12)

Round 22 [dec] x 6 (6)

Fo, close hole and weave in yarn tail (no yarn tail necessary for assembly).

Head

With white yarn

Stuff as you go.

Round 1: mc with 6 st (6)

Round 2: [inc] x 6 (12)

Round 3: [sc 1, inc] x 6 (18)

Round 4: [sc 2, inc] x 6 (24)

Rounds 5-17: sc 24 (24)

Option 1 for the eyes (If you want to do Option 2, skip this part and move to round 18 below):

Before continuing onto round 18, sew the eye patch on. The eye patch should be placed on the left side of the face.

Insert the safety eyes on top of the 2 circles of felt and then insert the eyes with the felt (add a bit of glue behind the felt before putting it on the head) between rounds 8 and 9 of the head, counting from the top. Place the eyes about 1 inch (2½ cm) apart, or as desired. Place the plastic fastening circles to the back of each eye and continue crocheting the head.

Round 18: [sc 2, dec] x 6 (18)

Round 19: [sc 1, dec] x 6 (12)

Round 20: [dec] x 6 (6)

Fo, close hole and leave a long yarn tail for assembly.

Ears

(make 2)

With brown yarn

Do not stuff.

Round 1: mc with 6 st (6)

Round 2: sc 6 (6)

Round 3: [sc 1, inc] x 3 (9)

Rounds 4-8: sc 9 (9)

Round 9: [sc 2, inc] x 3 (12)

Rounds 10-11: sc 12 (12)

Fo, close hole and leave a long yarn tail for assembly.

Cut a pipe cleaner in half. Fold each piece in half and insert the folded end into each ear.

Weave the yarn tail around the pipe cleaner, once it’s in the ear, to keep it from moving around. Fo and tuck in the starting and ending yarn tails and trim the extra pipe cleaner that is sticking out of the bottom of the ear.

Muzzle

With white yarn

Stuff as you go.

Round 1: mc with 6 st (6)

Round 2: [inc] x 6 (12)

Round 3: [sc 1, inc] x 6 (18)

Rounds 4-5: sc 18 (18)

Round 6: [sc 8, inc) x 2 (20)

Round 7-8: sc 20 (20)

Round 9: [sc 9, inc] x 2 (22)

Round 10: sc 22 (22)

Fo and leave a long yarn tail for assembly.

Nose

With black yarn

Do not stuff.

Round 1: mc with 6 st (6)

Round 2: [sc 4 in the first st, sc 2] x 2 (12)

Round 3: sc 1, inc, inc, inc, 3 sc, inc, inc, inc, sc 2 (18)

Fo and leave a long yarn tail for assembly.

Tail

With white yarn

Do not stuff.

Round 1: mc with 6 st (6)

Rounds 2-4: sc 6 (6)

Round 5: [sc 1, inc] x 3 (9)

Rounds 6-7: sc 9 (9)

Change to brown yarn

Rounds 8-14: sc 9 (9)

Fo and leave a long yarn tail for assembly.

Use half a pipe cleaner. Fold it in half and insert the folded end into the tail.

Weave the yarn around the pipe cleaner, once it’s in the tail, to keep it from moving

around. Weave the yarn tail only in the brown part of the tail, or else the brown

will show through the white. Trim the extra pipe cleaner that is sticking out of the

bottom of the tail. Now you can stuff it a bit using a pencil to move the stuffing around the tail.

Patch near the tail

With brown yarn

Do not stuff.

This part is worked in rows. At the end of every row, ch 1 and turn.

Row 1: ch 15, sc in the 2nd ch from the hook and sc to the end of the chain (14)

Row 2: sc 14 (14)

Row 3: dec, sc 10, dec (12)

Row 4: sc 12 (12)

Row 5: dec, sc 8, dec (10)

Row 6: sc 10 (10)

Row 7: dec, sc 6, dec (8)

Row 8: sc 8 (8)

Row 9: dec, sc 4, dec (6)

Row 10: sc 6 (6)

Row 11: dec, sc 2, dec (4)

Row 12: sc 4 (4)

Fo and leave a long yarn tail for assembly.

Oval patches

(make 2)

With brown yarn

Do not stuff.

Round 1: mc with 6 st (6)

Round 2: [sc 4 in the first st, sc 2] x 2 (12)

Fo and leave a long yarn tail for assembly.

Front legs

(make 2)

With white yarn

Stuff as you go.

Round 1: mc with 6 st (6)

Round 2: [inc] x 6 (12)

Rounds 3-5: sc 12 (12)

Round 6: [sc 1, dec] x 3, sc 3 (9)

Round 7: [sc 1, dec] x 2, sc 3 (7)

Rounds 8-17: sc 7 (7)

Fo and leave a long yarn tail for assembly.

Back legs

(make 2)

With white yarn

Stuff as you go.

Round 1: mc with 6 st (6)

Round 2: [inc] x 6 (12)

Rounds 3-5: sc 12 (12)

Round 6: [sc 1, dec] x 3, sc 3 (9)

Round 7: [sc 1, dec] x 2, sc 3 (7)

Rounds 8-13: sc 7 (7)

Fo and leave a long yarn tail for assembly.

Collar

With blue yarn

Do not stuff.

This part is worked in rows.

Row 1: ch 27, sc in the 2nd ch from the hook and sc to the end of the chain (26)

Fo, leave a yarn tail to tie collar around the dog’s neck and weave in starting yarn tail.

Tag

With yellow yarn

Do not stuff.

Leave a longer starting yarn tail than usual.

Round 1: mc with 6 st (6)

Fo and leave a yarn tail to tie the tag to the collar.

Assembly

Muzzle: Sew the muzzle to the head using the yarn tail leftover from the

muzzle. The bottom of the muzzle is placed in between rows 4 and 5 of the head

(counting from the bottom of the head and up). You may stuff the muzzle a bit

more if desired just before completely sewing on the muzzle. Weave in the yarn tail.

Nose: Sew the nose onto the muzzle using the yarn tail leftover from the nose.

The bottom of the nose should be placed just under row 1 of the muzzle. Tuck in

the starting yarn tail under the nose as you go. Don’t cut off the yarn tail just yet.

You will use it for the mouth.

Patch on the head: If you chose Option 1 for the eyes, skip this step. Sew

the patch onto the left side of the head, just above the muzzle. Weave in the yarn tail.

Mouth: Embroider a mouth on the muzzle using the yarn tail from the nose.

Fasten the yarn with one of the stitches around the nose. Weave in the yarn tail.

Ears: Sew the ears on top of the head. Weave in the yarn tail.

Head and Body: Sew the head to the body on an angle using the head’s yarn

tail. Weave in the yarn tail.

Collar and Tag: Tie the tag around the middle of the collar, using the

starting and the end yarn tails of the tag. Make a knot and cut ends close to the

knot.

Put the collar around the dog’s neck and sew the 2 ends together.

Tail Patch: Sew the tail patch to the body. The bottom of the patch is placed

between rounds 1 and 2 of the body. The top of the patch should be placed

between rows 12 and 13 of the body. Tuck in the starting yarn tail of the patch as

you sew it on. Weave in the end yarn tail.

Tail: Sew the tail onto the body. The bottom of the tail should be placed on the

bottom and middle of the tail patch, and between rows 1 and 2, counting from the

bottom and up.

Oval Patches: Sew the patches on an angle, pointing towards the middle of

the body. The bottom of the patches should be placed one row above the top of

the tail patch and have 6 or 7 stitches in between the two patches. Tuck in the

starting yarn tail of each patch as you sew it on. Weave in the yarn tail.

Front Legs: Sew the legs on the body, with the opening of the legs layed flat.

Sew them on between rounds 16 and 17 of the body counting from the bottom and

up. Sew them on about 3 stitches apart. Sew down rounds 1 to 4, counting from the

opening and down, to tack down the legs.

Back Legs: Sew the legs on the body, with the opening of the legs layed flat.

Sew them on between rows 1 and 2 of body. Weave in the yarn tail.

Eyes: Option 2 for the eyes: Insert the safety eyes on top of the 2 circles of

felt. Glue on the felt and the eyes between rows 8 and 9 of the head, counting

from the top. Place the eyes about 1 inch (2½ cm) apart, or as desired.

Congratulations!

Max is now complete! I hope you enjoyed making this amigurumi as much as I had

making the pattern. 

NOTE: Please be careful giving your finished toy to young children. It contains small pieces, such as the safety eyes and the pipe cleaners, that could harm them.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *