Reyna the Monarch Dragon Amigurumi Free Crochet Pattern

admin — Thu, 09 Feb 2023 17:28:38 +0000

Wonderful amigurumi animal patterns are on this site for free. In this article, I shared with you the amigurumi dragon pattern.

Reyna the Monarch Dragon

Materials:

Size 10 crochet thread: 350yd per ball. 2 balls of orange, 2 balls of black, 1 ball of yellow, 2 ballsof white, and 1 ball of pink. (Please note: these are crochet thread not yarn.) Often not largeamounts are needed and some thread could be estimated and unwound for use as your secondthread.

Hook 2.75mm for double thread

Hook 1.80mm for single thread

Large eye needle

Instructions:

All rounds are done continuously and all rows are finished with one chain and turn unlessotherwise indicated.

Work in all tails after assembly.

Assembly instructions can be found between each piece.

Abbreviations:

ss slip stitch sc single crochet

hdc half double crochet dc double crochet

fo fasten off mr magic ring

sc_tog single crochet specified number of sts together

st stitch ch chain

llt leave long tail

HEAD:

2 CH, DOUBLE THREAD ORANGE

1.Rd: 6sc into second chain fromhook

2.Rd: 2sc in each = 12st

3.Rd: (1sc, 2sc in next) x 6 = 18st

4.Rd: (2sc, 2sc in next) x 6 = 24st

5.Rd: (3sc, 2sc in next) x 6 = 30st

6.Rd: (4sc, 2sc in next) x 6 = 36st

7.Rd: (5sc, 2sc in next) x 6 = 42st

8.Rd: (6sc, 2sc in next) x 6 = 48st

9.Rd: sc in each = 48st

10.Rd: (7sc, 2sc in next) x 6 = 54st

11.-16. Rd: sc in each = 54st (6 rounds)

17.Rd: (7sc, sc2tog) x 6 = 48st

18.Rd: (6sc, sc2tog) x 6 = 42st

19.Rd: (5sc, sc2tog) x 6 = 36st

20.Rd: (4sc, sc2tog) x 6 = 30st

21.Rd: (3hdc, hdc2tog) x 6 = 24st

22.Rd: hdc2tog x 6, sc2tog x 6 = 12st, Stuff

23.Rd: sc2tog x 6= 6sc, fasten off

FACE:

15 CH, DOUBLE THREAD, ORANGE

Row: starting in second ch from hook: 13sc, 3sc in next ch, opposite side of ch: 13sc = 29st, 2ch, turn
Row: 7hdc, 6sc, (2sc in next) x 3, 6sc, 7hdc = 32st, 2ch, turn
Row: 2hdc in next, 8hdc, 4sc, (1sc, 2sc in next) x 3, 4sc, 8hdc, 2hdc in next = 37st, 2ch, turn
Row: 2hdc in next, 8hdc, 5sc, (2sc in next, 2sc) x 3, 5sc, 8hdc, 2hdc in next = 42st, ch, turn
Row: in Frontloops: sc around = 42st, 2ch, turn
Row: 3dc, 7hdc, 22sc, 7hdc, 3dc = 42st, 2ch, turn
Row: 2dc in next, 7dc, 5hdc, 3sc, (sc2tog, sc) x 3, sc2tog, 2sc, 5hdc, 7dc, 2dc in next = 40st, 2ch, turn
Row: 6dc, 5hdc, 18sc, 5hdc, 6dc = 40st, 2ch, turn
Row: 6dc, 5hdc, 7sc, sc2tog x 2, 7sc, 5hdc, 6dc = 38st, 2ch, turn
Row: 6dc, 5hdc, 6sc, sc2tog x 2, 6sc, 5hdc, 6dc = 36st, 2ch, turn
Row: 6dc, 5hdc, 4sc, sc6tog, 4sc, 5hdc, 6dc = 31st, 2ch, turn
Row: 2dc in next, 4dc, 4hdc, 2sc, skip the next 9sts, 2sc, 4hdc, 4dc, 2dc in next = 24st, 2ch, turn
Row: 2dc in next, 4dc, 3hdc, 2sc, sc4tog, 2sc, 3hdc, 4dc, 2dc in next = 23st, 2ch, turn
Row: 2dc in next, 3dc, 2hdc, 3sc, sc5tog, 3sc, 2hdc, 3dc, 2dc in next = 21st, 2ch, turn
Row: 2dc, 4hdc, 9sc, 4hdc, 2dc = 21st, fo, llt

Assembly:

Stitch holes together on top of face. Attach to head on the side you ended withoverlapping by about half. Pin it in place. Stuff as you go.

NECK:

30 CH – USE SS TO MAKE A RING, DOUBLE THREAD ORANGE, LLT

Rd: 30sc = 30st
– 4. Rd: sc in each = 30st (3 rounds)
Rd: (5sc, 2sc in next) x 5 = 35st
– 8. Rd: sc in each = 35st (3 rounds)
Rd: (6sc, 2sc in next) x 5 = 40st
– 12. Rd: sc in each = 40st (3 rounds), ch and turn after last round
Row: skip next, sc2tog, 11sc, sc2tog = 13st, ch, turn
Row: skip next, sc2tog, 8sc, sc2tog = 10st, ch, turn
Row: skip next, sc2tog, 7sc = 8st, ch, turn
Row: skip next, sc2tog, 5sc = 6st, ch, turn
Row: skip next, sc2tog, 3sc = 4st, ch, turn
Row: sc2tog x 2 = 2st, ch, turn
Row: sc2tog = 1st, fo, llt

Assembly:

Pin straight end of neck to head from the edge of the face on the bottom to thecenter of the back of the head. If you want a different angle to the head this is where youwould change it. Stitch evenly around the neck.

BODY:

2 CH, DOUBLE THREAD, BLACK

Rd: 6sc into second chain from hook
Rd: 2sc in each = 12st
Rd: (1sc, 2sc in next) x 6 = 18st
Rd: (2sc, 2sc in next) x 6 = 24st
Rd: (3sc, 2sc in next) x 6 = 30st
Rd: (4sc, 2sc in next) x 6 = 36st
Rd: (5sc, 2sc in next) x 6 = 42st
Rd: (6sc, 2sc in next) x 6 = 48st
– 9. Rd: sc in each = 48st (5 rounds)
Row: 32sc, 1 ss, ch, turn
Row: A) skip ss, 2sc, 28hdc, 2sc, ss, ch, turn

B) skip ss, 2sc, 28hdc, 2sc, sc in (a) ch, 14sc, sc in (b) ch

– 14. Rd: sc in each = 48st (4 rounds)
Row: 32sc, 1 ss, ch, turn
Row: A) skip ss, 2sc, 28hdc, 2sc, ss, ch, turn

B) skip ss, 2sc, 28hdc, 2sc, sc in (a) ch, 14 sc, sc in (b) ch

17.-18. Rd: sc in each = 48st (2 rounds)

19.Rd: (6sc, sc2tog) x 6 = 42st

20.-24. Rd: sc in each = 42st (5 rounds)

25.Rd: (5sc, sc2tog) x 6 = 36st

26.-32. Rd: sc in each = 36st (7 rounds)

33.Row: 22sc, 1 ss, ch, turn

34.Row: A) skip ss, 2sc, 18hdc, 2sc, ss, ch, turn

B) skip ss, 2sc, 18hdc, 2sc, sc in (a) ch, 12 sc, sc in (b) ch

35.-41. Rd: sc in each = 36st (7 rounds)

42.Rd: (4sc, sc2tog) x 6 = 30st

43.Rd: (3sc, sc2tog) x 6 = 24st

44.Rd: (2sc, sc2tog) x 6 = 18st

45.Rd: (1sc, sc2tog) x 6 = 12st, stuff body.

46.Rd: sc2tog x 6 = 6st

47.Rd: sc2tog x 3 = 3st, fasten off

Assembly:

Attach the neck to the body on the bigger end.

FRONT LEGS:

DOUBLE THREAD, MR, MAKE 2, WHITE, BLACK

White

Start with the toes: double thread, 9ch – connect with ss,make 6 total

Rd: 1sc in each = 9st
Rd: 3sc, 3hdc, 3sc = 9st
Rd: sc2tog, 1sc, hdc2tog, 1hdc, sc2tog, 1sc = 6st
Rd: sc2tog, hdc2tog, sc2tog = 3st, 1ss, fo

Add the toes to the feet starting in the beginning row fromthe claws, three each foot. As you add the toes make surethe curve goes towards the top of the foot.

Black

Rd: 7sc in the third toe beginning in last st, 5sc in second toe beginning in 2 nd after the last st, 9sc in the first toe beginning in 2 nd after the last st, sc in last 4 sts of second toe, sc in last 2 sts of third toe. = 27st

Rd: (Right) sc2tog, 5sc, 2tog x 2, 5sc, sc2tog, 9sc = 23st (left) 9sc, sc2tog, 5sc, sc2tog x 2, 5sc, sc2tog = 23st

Rd: (2sc, sc2tog) x 5, 3sc = 18st
Row: 4sc, ss, ch, turn
Row: a)Skip 1, 2sc, 10hdc, 2sc, ss, ch, turn

b) Skip 1, 2sc, 10hdc, 2sc, ss in (a) row ch, ch, turn

c) Skip 1, 2sc, 10hdc, 2sc, ss in (b) row ch, ch, turn

d) Skip 1, 2sc, 10hdc, 2sc, sc in (a) row ch, 2sc, sc in (b) row

10.-17. Rd: sc in each = 18st (8 rounds)

Row: 13sc, ss, ch, turn
Row: a) skip ss, 2sc, 7hdc, 2sc, ss, ch, turn

b) skip ss, 2sc, 7hdc, 2sc, sc in row a, 5sc, sc in row b

(right) Rd: 6sc, (2sc in next) x 6, 6sc (left) Rd: (2sc in next) x 6, 12sc
(Both) Rd: sc in each = 24st
(Right) Row: ch, turn, 15sc, ch, turn (Left) Row: 9sc, ch, turn
Row: sc2tog, 11sc, sc2tog = 13st
Row: sc2tog, 9sc, sc2tog = 11st
Row: sc2tog, 7sc, sc2tog = 9st
Row: sc2tog, 5sc, sc2tog, = 7st
Row: sc2tog, 3sc, sc2tog, = 5st, fo, llt

Assembly:

Wait to attach front legs until after back legs are put on. There is a little more room to move these legs around to keep the legs squared up for stability. When you place them put them in the natural shoulder position stuffing firmly as you go. It needs to be firm to support the weight. I wanted the legs to be closer together so I did some additional stitching in the underarm area to hold them in more. Stitch the gaps between the toes together beginning 1/3 down the toes on the bottom touching sections. This will make them more forward facing and hide any stuffing peeking through at the junction.

BACK LEGS:

DOUBLE THREAD, MR, MAKE 2, BLACK, WHITE

White

Start with the toes: double thread, 9ch – connect with ss, make 6 total

Rd: 1sc in each = 9st
Rd: 3sc, 3hdc, 3sc = 9st
Rd: sc2tog, 1sc, hdc2tog, 1hdc, sc2tog, 1sc = 6st
Rd: sc2tog, hdc2tog, sc2tog = 3st, 1ss, fo

Add the toes to the feet starting in the beginning row from the claws, three each foot. As you add the toes make sure the curve goes towards the top.

Black

Rd: 7sc in the third toe beginning in last st, 5sc in second toe beginning in 2 nd st after the last st, 9sc in the first toe beginning in 2 nd st after the last st, sc in last 4 sts of second toe, sc in last 2 sts of third toe. = 27st

Rd: (left) sc2tog, 5sc, 2tog x 2, 5sc, sc2tog, 9sc = 23st (right) 9sc, sc2tog, 5sc, sc2tog x 2, 5sc, sc2tog = 23st

Rd: (2sc, sc2tog) x 5, 3sc = 18st
Row: 4sc, ss, ch, turn
Row: a)Skip 1, 2sc, 10hdc, 2sc, ss, ch, turn

b) Skip 1, 2sc, 10hdc, 2sc, ss in (a) row ch, ch, turn

c) Skip 1, 2sc, 10hdc, 2sc, ss in (b) row ch, ch, turn

d) Skip 1, 2sc, 10hdc, 2sc, sc in (a) row ch, 2sc, sc in (b) row

10.-17. Rd: 8sc, 2sc in next, 7sc, sc2tog = 18st (8 rounds)

18.Rd: (5sc, 2sc in next) x 3 = 21st

19.Rd: (6sc, 2sc in next) x 3 = 24st

20.-21. Rd: sc in each = 24st (2 rounds)

22.Row: (left) 16sc, ch, turn, 6sc, (2sc in next) x 6, ch, turn (right) 4sc, ch, turn, (2sc in next) x 6, 6sc, ch, turn

23.Row: (left) (2sc in next) x 6, 12sc = 24st, ch, turn (right) 12sc, (2sc in next) x 6 = 24st, ch, turn

24.Row: (both) sc2tog, 20sc, sc2tog = 22st, ch, turn

25.Row: (left) sc2tog, 4sc, sc2tog, 5sc, sc2tog, 5sc, sc2tog = 18st, ch, turn (right) sc2tog, 5sc, sc2tog, 5sc, sc2tog, 4sc, sc2tog = 18st, ch, turn

26.Row: (left) sc2tog, 2sc, sc2tog, 3sc, sc2tog, 5sc, sc2tog = 14st, ch, turn (right) sc2tog, 5sc, sc2tog, 3sc, sc2tog, 2sc, sc2tog = 14st, ch, turn

27.Row: (both) sc2tog, 4sc, sc2tog, 4sc, sc2tog = 11st, ch, turn

28.Row: (left) sc2tog, 3sc, sc2tog, 2sc, sc2tog = 8st, ch, turn (right) sc2tog, 2sc, sc2tog, 3sc, sc2tog = 8st, ch, turn

29.Row: (both) sc2tog, 4sc, sc2tog = 6st, ch, turn

30.Row: (both) sc2tog, 2sc, sc2tog = 4st, fo, llt

Assembly:

Attach the back legs leaving room for the tail at the end. Stuff firmly. Stitch the gaps between the toes as done with the front legs.

TAIL:

30 CH – MAKE A RING WITH SS, DOUBLE THREAD, LLT, BLACK

1.Rd: sc in each = 30st

2.-7. Rd: 15sc, 15hdc = 30st (6 rounds)

8.Rd: (8sc, sc2tog) x 3 = 27st

9.-14. Rd: sc in each = 27st (6 rounds)

15.Rd: (7sc, sc2tog) x 3 = 24st

16.Row: 16sc, ss, ch, turn

17.Row: a) skip ss, 2sc, 13hdc, 2sc, ss, ch, turn

b) skip ss, 2sc, 13hdc, 2sc, ss in row a, ch, turn

c) skip ss, 2sc, 13hdc, 2sc, ss in row b, ch, turn

d) skip ss, 2sc, 13hdc, 2sc, sc in row a, 5sc, 1sc in row b

18.-23. Rd: sc in each = 24st (6 rounds)

24.Rd: (2sc, sc2tog) x 6 = 18st

25.Row: 8sc, ss, ch, turn

26.Row: a) skip ss, 2sc, 7hdc, 2sc, ss, ch, turn

b) skip ss, 2sc, 7hdc, 2sc, ss in row a, ch, turn

c) skip ss, 2sc, 7hdc, 2sc, ss in row b, ch, turn

d) skip ss, 2sc, 7hdc, 2sc, ss in row a, ch, turn

e) skip ss, 2sc, 7hdc, 2sc, ss in row b, ch, turn

f) skip ss, 2sc, 7hdc, 2sc, sc in row a, 5sc, sc in row b

27.Rd: sc in each = 18st

28.Row: 11sc, ss, ch, turn

29.Row: a) skip ss, 2sc, 7hdc, 2sc, ss, ch, turn

b) skip ss, 2sc, 7hdc, 2sc, ss in row a, ch, turn

c) skip ss, 2sc, 7hdc, 2sc, ss in row b, ch, turn

d) skip ss, 2sc, 7hdc, 2sc, sc in row a, 5sc, sc in row b

30.Rd: 16sc, sc2tog = 17st

31.Row: 10sc, ss, ch, turn

32.Row: a) skip ss, 2sc, 6hdc, 2sc, ss, ch, turn

b) skip ss, 2sc, 6hdc, 2sc, ss in row a, ch, turn

c) skip ss, 2sc, 6hdc, 2sc, ss in row b, ch, turn

d) skip ss, 2sc, 6hdc, 2sc, sc in row a, 5sc, sc in row b

Rd: 15sc, sc2tog = 16st
Rd: Sc each = 16st
Rd: 14sc, sc2tog = 15st
Rd: Sc each = 15st
Rd: 13sc, sc2tog = 14st
Rd: Sc each = 14st
Row: 10sc, ss, ch, turn
Row: a) skip ss, 2sc, 5hdc, 2sc, ss, ch, turn

b) skip ss, 2sc, 5hdc, 2sc, ss in row a, ch, turn

e) skip ss, 2sc, 5hdc, 2sc, ss in row b, ch, turn

f) skip ss, 2sc, 5hdc, 2sc, sc in row a, 3sc, sc in row b

Rd: sc in each = 14st
Rd: 12sc, sc2tog = 13st
Rd: Sc each = 13st
Rd: 11sc, sc2tog = 12st
Rd: Sc each = 12st
Rd: 10sc, sc2tog = 11st
Rd: Sc each = 11st
Row: 3sc, ss, ch, turn
Row: a) skip ss, 1sc, 4hdc, 1sc, ss, ch, turn

b) skip ss, 1sc, 4hdc, 1sc, ss in row a, ch, turn

c) skip ss, 1sc, 4hdc, 1sc, ss in row b, ch, turn

d) skip ss, 1sc, 4hdc, 1sc, sc in row a, 3sc, sc in row b

Rd: 9sc, sc2tog = 10st
Rd: Sc each = 10st
Rd: 8sc, sc2tog = 9st
Rd: Sc each = 9st
Rd: 7sc, sc2tog = 8st
Rd: Sc each = 8st
Rd: 6sc, sc2tog = 7st
Rd: Sc each = 7st
Rd: 5sc, sc2tog = 6st
Rd: Sc each = 6st
Rd: 4sc, sc2tog = 5st
Row: ss, ch, turn
Row: a) skip ss, 2sc, ss, ch, turn

b) skip ss, 2sc, sc in row a, 1sc, sc in row b

63.Rd: sc in each = 5st

Rd. 3sc, sc2tog = 4st
Rd: 2sc, sc2tog = 3st
Rd: sc in each = 3st
Rd: sc3tog = 1st, fo

Assembly:

Attach tail to the rump and the very top of the thighs with the curve resting on theground. This adds to the stability of the piece. Stuff as you go. Be sure the tip of the tail doesn’tgo into the back leg.

Tail

color strips – make 8, orange, single thread, 1.8mm24ch

Row: starting in second ch from hook, 22sc, 3sc in next, in other side of ch: 22sc = 47st, ch, turn

Row: 23sc, 3sc in next, 23sc = 49, ch, turn
Row: 24sc, 3sc in next, 24sc = 51, ch, turn

Assembly:

Starting near the base, alternate sides, with first six up to the curve. The seventh is placed at the curve and up over the previously applied strips. The eighth is placed slightly overlapping the seventh and up over the first six. Stitch within the last row of stitches to keep a nice clean edge.

Tail spots – white, single thread, 1.8mm

Extra Small make 1

Rd: 4sc in MR, fo, llt

Small make 2

Rd: 5sc in MR, fo, llt

Medium make 7

Rd: 6sc in MR, fo, llt

Large make 2

Rd: 7sc in MR, fo, llt

Extra Large make 2

Rd: 8sc in MR, fo, llt

Extra, Extra Large make 2

Rd: 9sc in MR, fo, llt

Extra, Extra, Extra Large make 2

Rd: 6sc in MR
Rd: 2sc in each = 12st, ss, fo, llt

Assembly:

Under the tail color strips place 4 medium spots (2 on each side). Then, starting after the color strips, begin with the largest spots down to the smallest as you go down the tail.

Body

color strips – orange, single thread, 1.8mm

Front:

Extra Large make 2 (one right, one left)(both)10ch

(Left) 1. Row: starting in second ch from hook, 2sc in next, 5sc,2hdc, 3dc in next, in other side of ch: 2hdc, 5sc, 1ss = 20st, ch, turn

(Right) 1. Row: starting in second ch from hook, 1ss, 5sc, 2hdc, 3dc in next, in other side of ch:2hdc, 5sc, 2sc in next = 20st, ch, turn

(Left) 2. Row: 1ss, 5sc, 3hdc, 3dc in next, 3hdc, 6sc, 1ss = 22, fo, llt

(Right) 2. Row: 1ss, 6sc, 3hdc, 3dc in next, 3hdc, 5sc, 1ss = 22, fo, llt

Large, make 6

8ch

Row: starting in second ch from hook, 4sc, 2hdc, 3hdc in next, in other side of ch: 2hdc, 4sc 15st, fo, llt

Medium, make 4

7ch

Row: starting in second ch from hook, 3sc, 2hdc, 3hdc in next, in other side of ch: 2hdc, 3sc = 13st, fo, llt

Small, make 2

6ch

Row: starting in second ch from hook, 2sc, 2hdc, 3hdc in next, in other side of ch: 2hdc, 2sc = 11st, fo, llt

Extra small, make 2

5ch

Row: starting in second ch from hook, 1sc, 2hdc, 3hdc in next, in other side of ch: 2hdc, 1sc =9st, fo, llt

Assembly:

Place the extra-large strip from the edge of the neck over the curve of the shoulder, center the 3 large strips just off the tip and attach, place 1 medium strip next on each side of the first strip, follow these with 1 small on the bottom side and then 1 extra small on the bottom side. Repeat on the other side. Leave enough room between each piece to allow black to show through between them. (After I created the wings, I decided to replace the top two strips seen in the picture with the wings for placement.)

Back:

Extra Large, make 2

12ch

Row: starting in second ch from hook, 10sc, 3sc in next, in other side of ch: 10sc = 23st, ch, turn

Row: 11sc, 3sc in next, 11sc = 25, fo, llt

Large, make 4

12ch

Row: starting in second ch from hook, 8sc, 2hdc, 3hdc in next, in other side of ch: 2hdc, 8sc = 23st, fo, llt

Medium, make 6

8ch

Row: starting in second ch from hook, 4sc, 2hdc, 3hdc in next, in other side of ch: 2hdc, 4sc =15st, fo, llt

Small, make 5

5ch

Row: starting in second ch from hook, 2sc, 1hdc, 3dc in next, in other side of ch: 1hdc, 2sc =9st, fo, llt

Extra small, make 2

4ch

Row: starting in second ch from hook, 1sc, 1hdc, 3dc in next, in other side of ch: 1hdc, 1sc =7st, fo, llt

Assembly:

Place the extra-large strips with corners touching at the center back and over the curve of the thigh, center the 2 large strips just off the tip and attach, place 1 medium strip behind and 2 in front of the large. Follow these with 2 small on the front and then 1 extra small on the back. (After both sides are attached there will be just enough room for 1 small between them in the back.) Repeat on the other side. Leave enough room between each piece to allow black to show through between them.

EYES:

SINGLE THREAD – WHITE, YELLOW, BLACK, MAKE 2, HOOK 1.8mm

Black

Rd: 6sc in MR = 6st
Rd: 2sc in each = 12st
Rd: (1sc, 2sc in next) x 6 = 18st
Rd: (2sc, 2sc in next) x 6 = 24st, ss, fo, llt

Yellow: 3ch

Rd: 1sc, 3sc in next, (on other side of ch) 2sc in next = 6st
Rd: 2sc in each = 12st
Rd: (1sc, 2sc in next) x 6 = 18st
Rd: (2sc, 2sc in next) x 6 = 24st
Rd: (3sc, 2sc in next) x 6 = 30st, ss, fo, llt

White, 4ch

Rd: 2sc, 3sc in next, (on other side of ch) 1sc, 2sc in next = 8st
Rd: 2sc in each = 16st
Rd: (1sc, 2sc in next) x 8 = 24st
Rd: (2sc, 2sc in next) x 8 = 32st
Row: 3sc, ss, ch, turn
Row: skip 1, 1ss, 1sc, 2hdc, 1sc, 13ss, 1sc, 2hdc, 1sc, 1ss, fo, llt

Light spot, white

Rd: 6sc in MR = 6st, fo, llt

Assembly:

Sew the black pupil into the yellow iris with one side lining up. Sew the yellow iris onto the white lining up the straighter edge with the part that has the pupil closest to the edge.

Place the light spot on the back of the pupil going over into the iris a little. Next, do the eyeliner (below). Remember to make the second eye a mirror image. Place on face. Be careful of the angle of the eye as this can make a difference in the mood of the dragon.

Eyeliner, black

Starting at front corner of the eye, along the top edge, through all layers, 17sc, 2ch, fo, llt

WINGS:

MAKE 2, 2CH, DOUBLE THREAD, ORANGE

Row: 2sc in second ch from hook = 2st, ch, turn
Row: 3sc in next, 2sc in next = 5st, ch, turn
Row: 4sc, 3sc in next = 7st, ch, turn

4.-5. Row: Sc in each (2 rows)

Row: 3sc in next, 4sc, sc2tog = 8st, ch, turn
Row: 7sc, 3sc in next = 10st, ch, turn
Row: 8sc, sc2tog = 9st, ch, turn

9.-10. Row: Sc in each (2 rows)

Row: 8sc, 2sc in next = 10st, ch, turn
Row: 10sc = 10st, ch, turn
Row: 9sc, 2sc in next = 11st, ch, turn

14.-15. Row: Sc in each (2 rows)

Row: 2sc in next, 10sc = 12st, ch, turn
Row: 11sc, 2sc in next = 13st, ch, turn
Row: 2sc in next, 12sc = 14st, ch, turn

19.-20. Row: Sc in each (2 rows)

Row: sc2tog, 11sc, 2sc in next = 14s, ch, turn
Row: 2sc in next, 13sc = 15st, ch, turn
Row: 13sc, sc2tog = 14st, ch, turn

24.-25. Row: Sc in each (2 rows)

Row: sc2tog, 12sc = 13st, ch, turn
Row: sc2tog, 9sc, sc2tog = 11st, ch, turn
Row: sc2tog, 7sc, sc2tog = 9st, fo first one made, do not fo second one created

Repeat steps 1-28 to create second side.

Sc both sides of wing together, 2sc in tip of wing to turn the corner.

When back up to row 28 work in a round around both sides.

Rd: 7sc, sc4tog, 7sc = 15st
Rd: left wing: 18sc, ch, turn (This is more than 1 full round.)

Right wing: ch, turn, 18sc, ch, turn (This is more than 1 full round.)

Row: 10sc = 10st, ch, turn
Row: sc2tog, 6sc, sc2tog = 8st, ch, turn
Row: (2sc, sc2tog) x 2 = 6st, ch, turn
Row: (sc2tog) x 3 = 3st, ch, turn
Row: sc3tog, ch, fasten off

Assembly:

Stuff firmly. Finish the stuffing as you sew it into place so it stays firm all the way to the bottom and maintains its shape. Position this below the neck and above the shoulder body strips with the wing tips pointing toward the sky.

WING FEATHERS:

ORANGE, BLACK, WHITE, SINGLE THREAD, HOOK 1.8mm

Back layer of top feathers

Use black (b) and orange (o)

Large make 2

(b) 9ch (o) 19ch

Row: starting in second ch from hook, (o) 18sc, (b) 8sc, 3sc in next, in other side of ch: 8sc, (o) 18sc = 55st, ch, turn

Row: (o) 18sc, (b) 9sc, 3sc in next, 9sc, (o) 18sc = 57st, ch, turn
Row: (b) 28sc, 3sc in next, 28sc = 59st, fo, llt

Make another for the other side of the feather. Sc around the edges piecing the front and back of the feathers together with black, 3sc at the tip of the feather. Leave the bottom edge of the feather open.

Feather spots, white, single thread. Make one for each feather.

Rd: 6sc in MR

Assembly:

Position the spot in the center of the black and stitch it on. Stuff and attach the large feather, spot facing out, toward the tip of the wing. Have it pointing between the ceiling and the wall. Place the stitches on each side of the wing over the seam using matching colors.

Repeat on other wing.

Medium make 2

(b) 7ch (o) 17ch

Row: starting in second ch from hook, (o) 16sc, (b) 6sc, 3sc in next, in other side of ch: 6sc, (o)

16sc = 47st, ch, turn

Row: (o) 16sc, (b) 7sc, 3sc in next, 7sc, (o) 16sc = 49st, ch, turn
Row: (b) 24sc, 3sc in next, 24sc = 51st, fo, llt

Feather spots, white, single thread. Make one for each feather.

Rd: 5sc in MR

Assembly:

Position the spot in the center of the black and stitch it on. Stuff and attach the medium feather (spot facing out) below the large feather. Place the stitches on each side of the wing over the seam using matching colors. Repeat on other wing.

Small make 2

(b) 5ch (o) 15ch

Row: starting in second ch from hook, (o) 14sc, (b) 4sc, 3sc in next, in other side of ch: 4sc, (o) 14sc = 39st, ch, turn

Row: (o) 14sc, (b) 5sc, 3sc in next, 5sc, (o) 14sc = 41st, ch, turn
Row: (b) 20sc, 3sc in next, 20sc = 43st, fo, llt

Feather spots, white, single thread. Make one for each feather.

Rd: 4sc in MR

Assembly:

Position the spot in the center of the black and stitch it on. Stuff and attach below the medium feather. Place the stitches on each side of the wing over the seam using matching colors. Repeat on other wing.

Back layer of bottom feathers

Use black

Small make 2

10ch

Row: starting in second ch from hook, 8sc, 3sc in next, in other side of ch: 8sc = 19st, ch, turn

Row: 9sc, 3sc in next, 9sc = 21st, fo, llt

Feather spots,

white, single thread. Make one for each feather.

Rd: 3sc in MR

Assembly: Position the spot in the center of the top portion and stitch it on. Stuff and attach, spot facing out, below the small top feather. Place the stitches on each side of the wing over the seam. Repeat on other wing.

Medium make 2

12ch

Row: starting in second ch from hook, 10sc, 3sc in next, in other side of ch: 10sc = 23st, ch, turn

Row: 11sc, 3sc in next, 11sc = 25st, fo, llt

Feather spots, white, single thread. Make one for each feather.

Rd: 3sc in MR

Assembly: Position the spot in the center of the top portion and stitch it on. Stuff and attach, spot facing out, below the small feather. Place the stitches on each side of the wing over the seam. Repeat on other wing.

Large make 2

14ch

Row: starting in second ch from hook, 12sc, 3sc in next, in other side of ch: 12sc = 27st, ch, turn

Row: 13sc, 3sc in next, 13sc = 29st, fo, llt

Feather spots, white, single thread. Make one for each feather.

Rd: 3sc in MR

Assembly:

Position the spot in the center of the top portion and stitch it on. Stuff and attach, spot facing out, below the medium feather. Place the stitches on each side of the wing over the seam. Repeat on other wing.

Middle layer of top feathers

Using black (b) and orange (o)

Medium make 4

(o) 15ch

Row: starting in second ch from hook, (o) 13sc, 3sc in next, in other side of ch: 13sc = 29st, ch, turn

Row: (b) 14sc, 3sc in next, 14sc = 31st, fo, llt

Assembly:

Attach at tip of wing ¼ inch in front of back row of feathers, have it pointing just above where the first in the back row is. Reserve 2 medium feathers for later. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather. Repeat on other wing.

Note:

The reason for doubling the thickness of the feathers at this point is to give them more substance and less curling. It also allows you to stitch through the back layer without it showing. Do not stuff.

Large make 2

(o) 18ch

Row: starting in second ch from hook, (o) 16sc, 3sc in next, in other side of ch: 16sc = 35st, ch, turn

Row: (b) 17sc, 3sc in next, 17sc = 37st, fo, llt

Assembly:

Attach ¼ inch in front of back row of feathers, have it overlap the first a bit. Place the reserve medium feather now. You can look at the photos for an idea on placement. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather. Repeat on other wing.

Small make 2

(o) 10ch

Row: starting in second ch from hook, (o) 8sc, 3sc in next, in other side of ch: 8sc = 19st, ch,

turn

Row: (b) 9sc, 3sc in next, 9sc = 21st, fo, llt

Assembly: Attach below the medium feather. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather. Repeat on other wing.

Middle layer of bottom feathers

Using orange

Small make 2

8ch

Row: starting in second ch from hook, 7sc, 3sc in next, in other side of ch: 7sc = 17st, ch, turn

Row: 8sc, 3sc in next, 8sc = 19st, fo, llt

Assembly:

Attach below last feather. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather. Repeat on other wing.

Medium make 2

10ch

Row: starting in second ch from hook, 8sc, 3sc in next, in other side of ch: 8sc = 19st, ch, turn
Row: 9sc, 3sc in next, 9sc = 21st, fo, llt

Assembly:

Attach below the small feather. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather. Repeat on other wing.

Large make 2

12ch

Row: starting in second ch from hook, 10sc, 3sc in next, in other side of ch: 10sc = 23st, ch, turn

Row: 11sc, 3sc in next, 11sc = 25st, fo, llt

Assembly:

Attach below medium feather. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather. Repeat on other wing.

Front layer of feathers

Using black

Extra Large make 6

12ch

Row: starting in second ch from hook, 10sc, 3sc in next, in other side of ch: 10sc = 23st, fo, llt

Assembly:

Attach ¼ inch in front of last row, over the first placed in that row. Use another XL feather as the next, overlapping the first. Save 2 XL feathers for later. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather. Repeat on other wing.

Medium make 4

10ch

Row: starting in second ch from hook, 8sc, 3sc in next, in other side of ch: 8sc = 19st, fo, llt

Assembly:

Attach below last feathers. Save 2 medium feathers for later. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather. Repeat on other wing.

Small make 6

8ch

Row: starting in second ch from hook, (o) 6sc, 3sc in next, in other side of ch: 6sc = 15st, fo, llt

Assembly:

Attach 3 feathers below the last feather. Attach the saved medium feather. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather.

Repeat on other wing.

Large make 2

11ch

Row: starting in second ch from hook, 9sc, 3sc in next, in other side of ch: 9sc = 21st, fo, llt

Assembly:

Attach below the medium feather. Attach the saved XL feather. Place the stitches on the bottom of the feather and 2/3 up and across the back of each feather. Repeat on other wing.

HORNS

– MAKE 2, DOUBLE THREAD, MR, BLACK

Rd: 3sc in mr = 3st
Rd: 2sc, 2sc in next = 4st
Rd: 3sc, 2sc in next = 5st
Rd: Sc2tog, 1sc, 2sc in next, 1sc = 5st
Rd: Sc2tog, 1sc, 2sc in next, 1sc = 5st
Rd: Sc2tog, 1sc, 2sc in next x 2 = 6st
Rd: sc2tog, 1sc, 2sc in next, 2sc = 6st
Rd: Sc2tog, 1sc, 2sc in next x 2, 1sc = 7st
Rd: sc2tog, 1sc, 2sc in next, 3sc = 7st
Rd: 2sc in next, 6sc = 8st
Rd: 2sc in next, 3sc, sc2tog, 2sc = 8st
Rd: 2sc in next x 2, 2sc, sc2tog, 2sc = 9st
Rd: 2sc, 2sc in next, 2sc, sc2tog, 2sc = 9st
Rd: 2sc in next x 2, 3sc, sc2tog, 2sc = 10st
Rd: 2sc in next x 2, 3sc, sc2tog, 3sc = 11st, ss, ch, turn
Row: a) skip ss, 1sc, 4hdc, 1sc, ss, ch, turn

b) skip ss, 1sc, 4hdc, 1sc, ss in row a, ch, turn

c) skip ss, 1sc, 4hdc, 1sc, ss in row b, ch, turn

d) skip ss, 1sc, 4hdc, 1sc, sc in row a, 3sc, sc in row b

Rd: (Left) 2hdc in next x 2, 4sc, sc2tog, 3sc (Right) 3sc, sc2tog, 4sc, 2hdc in next x 2 = 12st
Rd: (Left) 1hdc, 2hdc in next x 2, 1hdc, 3sc, sc2tog, 3sc (Right) 3sc, sc2tog, 3sc, 1hdc, 2hdc in next x 2, 1hdc = 13st, ss, fo, llt

Assembly:

Stuff the horns lightly in the tip and firm in the lower portion. Attach close together on the top of the head pointing to the back, do not cut the thread. Work the thread up the front of the horn to the tip, work it through the stitches back down halfway. Pull the thread firmly to cause the tip of the horn to curl. Work the thread partway back up and down to lock the curl in.

NECK DESIGN:

SINGLE THREAD, BLACK, 1.8MM HOOK, MAKE 2

Ch 21

Row: starting in second ch from hook: 11sc, 11ch, turn, 10sc, (back to original ch) 5sc, 11ch,10sc, (back to original ch) 4sc, fo, llt

Assembly:

Pin in place below head joining to neck, make mirror images of each other. Try to use the natural curl to curl the tips around. Stitch around both sides of the design being careful to keep the attaching stitches under the piece.

EARS:
DOUBLE THREAD, ORANGE, BLACK, PINK, make 2

Start with orange

CH 13, llt

Row: starting in second ch from hook: 12sc = 12st, ch, turn
Row: sc2tog, 8sc, sc2tog = 10st, ch, turn
Row: sc in each = 10st, ch, turn
Row: sc2tog, 6sc, sc2tog = 8st, ch, turn
Row: sc in each = 8st, ch, turn
Row: sc2tog, 4sc, sc2tog = 6st, ch, turn
Row: sc in each = 6st, ch, turn
Row: sc2tog, 2sc, sc2tog = 4st, ch, turn
Row: sc in each = 4st, ch, turn
Row: sc2tog x 2 = 2st, ch, turn
Row: sc in each = 2st, ch, turn
Row: sc2tog = 1st, fo, llt

Sc with a single thread of black along top 2 edges of ears. At the tip of the ear do 2sc, 1ch, 2sc

to keep it pointy and help navigate the corner.

Inner ear:
pink, make 2

Ch 9

Row: starting in second ch from hook, 8sc = 8st, ch, turn
Row: sc2tog, 4sc, sc2tog = 6st, ch, turn
Row: sc in each = 6st, ch, turn
Row: sc2tog, 2sc, sc2tog = 4st, ch, turn
Row: sc in each = 4st, ch, turn
Row: sc2tog x 2 = 2st, ch, turn
Row: sc in each = 2st, ch, turn
Row: sc2tog = 1st, fo, llt

Assembly:
Sew the inner ear to the outer ear hiding the stitches. Attach the ears from behind the horns to behind and slightly below the eye. I use pins to hold placement.

FACE SPOTS:

BLACK, SINGLE THREAD, make 5

Ch 2

Rd: starting in second ch from hook, 6sc, fo, llt

Assembly:

Create a “V” out of the spots on the front of the face between the eyes and attach.

NOSTRILS:
DOUBLE THREAD, PINK, MAKE TWO DIRECTLY ON FACE

Place the two nostrils at the top corners of the muzzle.

With the sewing needle wrap the thread around a st 3 times. Repeat on the other side.

The post Reyna the Monarch Dragon Amigurumi Free Crochet Pattern appeared first on Free Amigurumi Crochet Patterns.

Reyna the Monarch Dragon Amigurumi Archives - Free Amigurumi Crochet Patterns

Reyna the Monarch Dragon Amigurumi Free Crochet Pattern

Materials:

Instructions:

Abbreviations:

HEAD:

FACE:

Assembly:

NECK:

Assembly:

BODY:

Assembly:

FRONT LEGS:

Assembly:

BACK LEGS:

Assembly:

TAIL:

Assembly:

Tail

Assembly:

Assembly:

Body

Assembly:

Assembly:

EYES:

Assembly:

WINGS:

Assembly:

WING FEATHERS:

Assembly:

Assembly:

Assembly:

Feather spots,

Assembly:

Assembly:

Note:

Middle layer of bottom feathers

Assembly:

Assembly:

Front layer of feathers

Assembly:

Assembly:

Assembly:

HORNS

NECK DESIGN:

Assembly:

FACE SPOTS:

Assembly: