Helicopter amigurumi is a fun and creative project for crochet enthusiasts. With this free helicopter amigurumi pattern, you can craft your own handmade amigurumi toy, give it as a gift, or add a new piece to your collection.

The pattern includes detailed step-by-step instructions and photos, making it easy to follow for both beginners and experienced crafters. Grab your yarn and hook, and let’s crochet this adorable amigurumi helicopter together!

Toy size: 30 cm.  

This master class does not contain crochet lessons and assumes basic knowledge. Difficulty level: easy. 

List of necessary materials and tools: 

Main materials Helicopter Amigurumi

1. Yarn YarnArt Jeans Plus #75 (55% cotton, 45% acrylic, 160m/100g) – 150g – main color. 

2. Yarn YarnArt Jeans Plus #88 (55% cotton, 45% acrylic, 160m/100g) – 100g. 

3. Yarn YarnArt Jeans #75 (55% cotton, 45% acrylic, 160m/50g) – a bit for sewing skis and crocheting chains of ch. 

4. Yarn YarnArt Jeans #88 (55% cotton, 45% acrylic, 160m/50g) – 15g (for crocheting the tail rotor). 

5. Yarn YarnArt Jeans #01 (55% cotton, 45% acrylic, 160m/50g) – 10g (for crocheting windows). 

Synthetic stuffing or other toy filler. 

Large-eyed needle, scissors. 

Hook sizes #2 and #4. 

Wooden ring – 1 pc. (outer diameter 98mm). 

Button diameter 4 cm – 2 pcs. 

Squeaker diameter 27 mm – 3 pcs. (for the main rotor blade). 

Fastener – 1 pc. 

Additional materials 

In the master class, beads, laces, buttons, clothespins, and a carabiner fastener are used. 

You can use other materials that you find necessary for your toy. 

Abbreviations: 

mr – magic ring 

ch – chain 

sl st – slip stitch 

ch st – chain stitch 

sc – single crochet 

inc – increase (crochet two stitches in one stitch) 

dec – decrease (crochet two stitches together) 

Helicopter Amigurumi Pattern

ROUND (1 pc.) 

Crochet with the main color, hook #4. 

We will use the round to separate the cabin from the tail section. 

1: 6 sc in mr; 

2: 6 inc (12); 

3: (1 inc, 1 sc) * 6 (18); 

4: (2 sc, 1 inc) * 6 (24); 

5: (1 inc, 3 sc) * 6 (30); 

6: 2 sc, (1 inc, 4 sc) * 5, 1 inc, 2 sc (36); 

7: 4 sc, (1 inc, 5 sc) * 5, 1 inc, 1 sc (42); 

8: (6 sc, 1 inc) * 6 (48); 

9: (1 inc, 7 sc) * 6 (54); 

10: 2 sc, (1 inc, 8 sc) * 5, 1 inc, 6 sc (60); 

11: 4 sc, (1 inc, 9 sc) * 5, 1 inc, 5 sc (66); 

FUSELAGE + TAIL BOOM (1 pc.) 

Take the wooden ring. 

We will crochet around the ring with the main color, hook #4, using single crochets. 

Insert the hook in the middle of the ring and pull up a loop. Yarn over and pull through the loop. Continue to make stitches in the same way (pull a loop from the middle of the ring, yarn over, and crochet). 

Lay the secondary yarn along the ring, cut to the needed length, and fix with a glue gun. Ensure the stitches are even. 

Foundation row – 84 stitches.

Helicopter Amigurumi Continue crocheting. 

12: 6 sc, (1 inc, 10 sc) * 5, 1 inc, 4 sc (72); 

13: 8 sc, (1 inc, 11 sc) * 5, 1 inc, 3 sc (78); 

14: 10 sc, (1 inc, 12 sc) * 5, 1 inc, 2 sc (84).

Finish with sl st. Fasten off and hide the thread. 

1: 84 sc in back loop only (84); 

2-21: 84 sc (84) (20 rows). 

Attach the round (from step 1) with the front side inside the cabin. 

22: 84 sc (joining the main part with the round) (84); 

23-25: 84 sc (84) (3 rows); 

26: (5 sc, 1 dec) * 3, 42 sc, (5 sc, 1 dec) * 3 (78); 

27: (4 sc, 1 dec) * 3, 42 sc, (4 sc, 1 dec) * 3 (72); 

28: (3 sc, 1 dec) * 3, 42 sc, (3 sc, 1 dec) * 3 (66); 

29: 66 sc (66); 

30: (9 sc, 1 dec) * 6 (60); 

31: (8 sc, 1 dec) * 6 (54); 

32: (7 sc, 1 dec) * 6 (48); 

33: 48 sc (48); 

34: (6 sc, 1 dec) * 6 (42); 

35: (5 sc, 1 dec) * 6 (36); 

36: (4 sc, 1 dec) * 6 (30). Stuff. 

37-51: 30 sc (30) (15 rows). 

Stuff the tail section as you go. 

Place the amigurumi helicopter as it will stand in the finished form (the bottom part is where we started decreasing in row 26). Place a marker in the center of the bottom of the tail – this will be the beginning of row 52. Crochet offset stitches to the marker (approximately 6-8 stitches, depending on your crochet tension).

Continue crocheting. 

52: 9 sc, (1 sc, 1 inc) * 6, 9 sc (36); 

53: 9 sc, (2 sc, 1 inc) * 6, 9 sc (42); 

54: 42 sc (42); 

55-56: (2 sc, 1 dec) * 3, (2 sc, 1 inc) * 6, (2 sc, 1 dec) * 3 (42) (2 rows); 

57: 42 sc (42); 

58: (5 sc, 1 dec) * 6 (36); 

59: (4 sc, 1 dec) * 6 (30); 

60: (3 sc, 1 dec) * 6 (24); 

61: (2 sc, 1 dec) * 6 (18); 

62: (1 sc, 1 dec) * 6 (12); 

63: 6 dec (6). Close the opening. 

Fasten off and hide the thread. 

MAIN ROTOR Helicopter Amigurumi

Main rotor hub (1 pc.) 

Crochet with YarnArt Jeans Plus #88, hook #4. 

1: 6 sc in mr; 

2: 6 inc (12); 

3: (1 inc, 1 sc) * 6 (18); 

4: (2 sc, 1 inc) * 6 (24); 

5-7: 24 sc (24) (3 rows); 

8: (1 sc, 1 inc) * 12 (36); 

9-11: 36 sc (36) (3 rows). Finish with sl st. Leave a thread for sewing. 

Helicopter Amigurumi Blades (3 pcs.) 

Crochet with YarnArt Jeans Plus #88, hook #4. 

1: 6 sc in mr; 

2: 6 inc (12); 

3: (1 inc, 1 sc) * 6 (18); 

4-13: 18 sc (18) (10 rows). 

Stuff halfway, insert the squeaker. 

14: (4 sc, 1 dec) * 3 (15); 

15-19: 15 sc (15) (5 rows). Stuff as you go. 

20: (3 sc, 1 dec) * 3 (12); 

21-23: 12 sc (12) (3 rows). Finish with sl st. Leave a thread for sewing. 

Make 2 more blades in the same way. 

Helicopter Amigurumi TAIL ROTOR 

Tail rotor hub (1 pc.) 

Crochet with YarnArt Jeans #88, hook #2. 

1: 6 sc in mr; 

2: 6 inc (12); 

3: (1 inc, 1 sc) * 6 (18); 

4-10: 18 sc (18) (7 rows). Finish with sl st. Leave a thread for sewing. 

Blades (2 pcs.) 

Crochet with YarnArt Jeans #88, hook #2. 

1: 6 sc in mr; 

2: 6 inc (12); 

3: (1 inc, 1 sc) * 6 (18); 

4-13: 18 sc (18) (10 rows). Stuff as you go. 

14: (4 sc, 1 dec) * 3 (15); 

15-17: 15 sc (15) (3 rows); 

18: (3 sc, 1 dec) * 3 (12); 

19-21: 12 sc (12) (3 rows). Finish with sl st. Leave a thread for sewing. 

Make another blade in the same way. 

SKIS (2 pcs.) 

Crochet with YarnArt Jeans Plus #88, hook #4. 

1: 6 sc in mr; 

2: 6 inc (12); 

3: (1 inc, 1 sc) * 6 (18); 

4-38: 18 sc (18) (35 rows). Stuff as you go. 

39: 3 dec, 6 inc, 3 dec (18); 

40: 18 sc (18); 

41: (1 sc, 1 dec) * 6 (12); 

42: 6 dec (6). Close the opening. 

Fasten off and hide the thread. 

Make another ski in the same way. 

Helicopter Amigurumi WINDOWS (2 pcs.) 

Crochet with YarnArt Jeans #01, hook #2. 

You need to make 4 semicircles. 

We will crochet in turning rows. Each new row begins with a chain stitch and a turn. Ch st replaces the first stitch of the next row. 

1: 4 sc in mr; 

2: 4 inc (8); 

3: (1 sc, 1 inc) * 4 (12); 

4: (2 sc, 1 inc) * 4 (16); 

5: (3 sc, 1 inc) * 4 (20); 

6: (4 sc, 1 inc) * 4 (24); 

7: (5 sc, 1 inc) * 4 (28); 

8: (6 sc, 1 inc) * 4 (32). 

Do not cut the thread, crochet ch st and crochet around the bottom part with sc. 

Fasten off, leaving a thread for sewing. 

Steam well. 

Make 3 more semicircles in the same way. 

Join 2 semicircles into a circle, sew approximately 1 cm on each side. 

Our windows are ready. 

Proceed to assembling the amigurumi helicopter: 

1. Sew the main rotor hub. Stuff as necessary. 

2. Sew the blades to the hub. 

3. Sew the skis with YarnArt Jeans #75. 

4. Sew the button windows. Attach the crocheted windows to them. 

5. Sew the tail rotor hub. Stuff as necessary. 

6. Sew the blades to the hub. 

7. Sew the fastener. You can choose different types of fasteners. Choose as you like. 

8. Attach YarnArt Jeans #75 to the front loop of the first row of the fuselage and crochet ch st braids 20-23 cm long. The number of braids depends on the number of educational materials. 

9. Attach your chosen educational items to the braids. 

Congratulations! 

Your Amigurumi Helicopter is ready! 

The post Helicopter Amigurumi Free Pattern appeared first on Free Amigurumi Crochet Patterns.

Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns. 

MATERIALS 

which you will need: 

– yarn x yarn, its analogue of different colors (for me: as in the photo): 

– hook hey 2; 

– yarn corresponding hook; 

– black felt (size 5 * 5 cm is enough); 

– yarn for a nose (for me); 

– twist for prpshavanyaya detailed; 

– filler for toys; 

– rattle for toys; 

– scissors, needle; 

– glue Moment gel or rahrd; 

– a button with a diameter of 1-1.5 cm in red, you can n another. 

Abbreviations 

Mr:  Magic ring 

SC: Single crochet 

İnc: increase 

Dec: Decrease 

Dc: Double crochet 

Hdc: Half double crochet 

sl-st: Slip stitch 

PATTERN 

Part no: 1 

Knit red yarn 

1- Magic ring 6sc 6 

2-6inc = 12 

3- (inc,3sc)*3= 15 

4-5) 15sc 

6) (3sc,dec)*3=12sc 

Fill the filler. Fasten thread and cut. leaving about 20 cm for sewing. Pull off the hole. 

Part no: 2 

1- Magic ring 6sc 6 

2- (inc,sc)*3=9sc 

3- (inc,2sc)*3= 12sc 

4-6) 12sc 

7) (dec,4sc)*2  =10sc 

8)10sc 

9) (dec,3sc)*2= 8sc 

10) 8sc 

11) (dec,2sc)*2 =6sc 

12-13) 6sc 

14) (inc,2sc)*2 =8sc 

15) 8sc 

16) (inc,3sc)*2 =10sc 

17) 10sc 

18) (inc,4sc)*2 =12sc 

19-21) 12sc 

22) (dec,2sc)*3 =9sc 

23) (dec,sc)*3 =6sc 

Do not stuff. fasten, tighten the hole. Cut the thread, hide it. 

Part 3 (2 pieces) 

We knit white yarn. Knit the inside out 

1- Magic ring 7sc 7 

2-7inc = 14 

3- (1sc, 1inc)*7 = 21 

4- (2sc, 1inc)*7 = 28 

5-7) 28sc 

Do not stuff. Fasten the thread, cut, leaving about 20 cm for threading. 

Part no: 4 (2 pieces) 

Knits yellow ridges. 

1- Magic ring 6sc 6 

2-6inc = 12 

3-(inc,5sc)*2=14 

4-(inc,6sc)*2=16 

5- (inc,7sc)*2=18 

6- (inc,8sc)*2=20 

7- (inc,9sc)*2=22 

8- (inc,10sc)*2=24 

9- 24sc 

Fasten the thread, cut. Stitch, fold in half and stitch. I make a regular thread in color. You can sew the main thread. 

Part no: 5 

We knit with yarn. Knit lo circle. Marker on the side. 

1) 9 ch, starting from the second loop 2 sc one loop, 6sc, 3 sc 1st loop, 6sc, sc = 18 

2) 2inc,6sc,3inc,6sc,inc =24sc 

3) (inc,sc)*2,6sc,(inc,sc)*3,6sc,inc,sc=30 

4) (inc,2sc)*2,6sc,(inc,2sc)*3,6sc,inc,2sc=36 

5) 4sc,inc,12sc,inc,4sc,inc,12sc,inc =40 

6-58) 40sc 

If an offset has occurred, then knit the offset loops. 

59) 4sc,dec,12sc,dec,4sc,dec,12sc,dec =36 

60) (dec,2sc)*2,6sc,(dec,2sc)*3,6sc,dec,2sc=30 

61) (dec,sc)*2,6sc,(dec,sc)*3,6sc,dec,sc=24 

62) 2dec,6sc,3dec,6sc,dec =18 

Fasten the thread, cut off leaving about 20 cm for stitching. 

If you have a cotton insole for shoes or its analogue up to 5 mm thick (you can use foam rubber), then we cut out the part from it according to the shape of our part. Insert the cut part into the knitted part, at the stage of knitting 59 rows. You can fill the beginning a little and make the end a filler. If there is no insole, then you can simply fill the part in half with a chalk, and the part should be flat. 

Part no: 6 

Knit in red colors 

1- Magic ring 6sc 6 

2-6inc = 12 

3- (1sc, 1inc) 6 = 18 

4- (2sc, 1inc) 6 = 24 

5- (3sc, 1inc) * 6 = 30 

6- (4sc, 1inc) 6 = 36 

7- (5sc, 1inc) 6 = 42 

8- 42sc 

9. Knit for the back wall detail green 42sc 

10- (inc,13sc)*3 =45sc 

11-12) 45sc 

Sew on part no: 2 n button. We look at the photo as it should be. The button is tight tight !!!! 

13- (inc,14sc)*3 = 48sc 

14-33) 48sc 

34- (dec,14sc)*3 = 45 

35-37) 45sc 

38- (dec,13sc)*3 = 42sc 

39-41) 42sc 

42) (dec,12sc)*3 = 39sc 

43-45) 39sc 

46- (dec,11sc)*3 = 36sc 

47-48) 36sc 

49- Change the color to red. Knit for the rear wall of the loop 36sc 

50- (dec,4sc)*6 =30sc 

51- (dec,3sc)*6 =24sc 

52- (dec,2sc)*6 =18sc 

53- (dec,sc)*6 =12sc 

45- 6dec =6sc 

We stuff the detail as far as knitted. Lock the thread, tighten the hole, hide the nug. Decoration Cut out a felt from a felt circle with a diameter of about 3-9 mm. We glue ah on the detail of Ho 3. See photo. 

To detail No: 5 was flatter it can be steamed iron. We sew parts no: 4 to part no: 6 inc using a button; sew part no: 2 to part no: 6 See photo. 

We sew parts No 3 and No 1 to part No 5. We embroider a mouth. 

Sew detail no: 5 to did no: 6. 

Finished work is celebrated. 

That’s all!!! 

The post Amigurumi Airplane Free Pattern appeared first on Free Amigurumi Crochet Patterns.